|Gettin’ jiggy with Photoshop|
Hi all! I’ve had several questions lately about how I do my costume concepts, so I thought I would answer them here.
Read on to learn some techniques and secrets …
(p.s. all of the tips n’ tricks I’m writing about are done using Adobe Photoshop CS5. Earlier versions of Photoshop have the same tools but may be found in different places, or be called something else. If you are unfamiliar with Photoshop, this tutorial will be confusing, so familiarize yourself with the tools first. I will do my best to answer questions too, so feel free to comment 🙂
I use Adobe Photoshop and a Wacom tablet to draw and paint my costume designs. You can use just about any painting program, but I must stress to you the importance of the Wacom tablet. It makes all the difference.
What is a Wacom tablet? It is a pen tablet that allows you to write, draw, and paint on your computer screen, just as you would on a piece of paper. It takes a little getting used to, but is very easy to use. Once you use a Wacom, you will never draw or paint with a mouse again. Ever.
I have an Intuous 3, but the Bamboo model is great for casual use and also very affordable. You don’t need a big honkin’ tablet, either. The smaller models work just fine – mine is a 6×8.
For technique, I often start with a sketch. If you’re working in Photoshop, put this sketch on its own layer. It doesn’t have to be fancy or very detailed, just the overall impression of the silhouette and key elements. For color, I will paint on the layer beneath, so the line drawing stays “on top” and the detail is not lost.
|Photoshop CS5 interface. If you are using an earlier version of PS, it’ll be similar, but some tools may be in different places.|
|Layer 1 has my sketch; Layer 2 has my color|
It’s okay to trace, too. It’s not cheating!
Here are some tips for those of you working in Photoshop:
If you are intending to mix and match, keep your skirts and tops on separate layers.
- Make new layers by clicking “Layer > New > Layer” in the top tool bar, or the small icon next to he trash can, on the bottom right of the Layers tool box.
- Rearrange layers in the Layers tool box by dragging and dropping them into position, in the stack. For instance, you jacket/gown layer should be above your skirt layer (just like in real life)
|All of these skirts and jackets are on different layers|
To change the overall color of a dress, jacket, skirt, etc., click “Image > Adjustments > Hugh Saturation.”
Check the box in the middle/lower right that says “colorize,” and move the sliders until you have the color you desire.
|I’ve changed my jacket from blue to orange. (click this image for a larger view)|
To add a print to your skirt, dress, etc., you can draw it on, but if you have a particular fabric in mind, such as this Duran Textiles print, try this:
|Lovely 18th c. textile print|
- Save the textile image from the web. Open in Photoshop, and copy and paste it onto your dress drawing.
- Make sure the fabric swatch is on a layer underneath your line drawing, so your sketch shows over the top
- Scale the swatch to the size that represents the actual fabric as it would be when made up as your garment (Edit > Transform > Scale , and hold down “shift” as you scale, to keep the ratio of the image the same)
- Duplicate the swatch and move it into position to create more “fabric.” (Image > Duplicate , or hold down Alt, and move the swatch to one side) Do this as many times as you need to create enough fabric to fill your drawing. It doesn’t have to be perfect.
- Make sure all your “fabric” is on one layer, by selecting all layers that contain fabric (select top fabric layer, then all the other fabric layers by holding “Ctrl” as you click them) and merge them (right click the selected layer and click “Merge Layers.”
- Now erase away the extra fabric outside of your line drawing, leaving your fabric inside. Erase any tidbits inside the drawing, such as trim that is a different color, or buttons, etc.
- The fabric does not curve or bend the way it would in real life, but you can get a general sense of how it might look. If you would like to add shading (darken/lighten), use the Dodge and Burn tools: dodge lightens, and burn darkens. (on your tool bar to the left; one looks like a lillipop, one looks like a hand making a loose fist. whichever you see, click and hold down to select the other.)
|All the extra erased|
If you want to try out many different colors for your one designs sketch, just duplicate your sketch, then paint on a new layer underneath. Some tips about painting with your wacom:
- Use the paintbrush tool, and select a hard, round brush
- In the “Brush” toolbox (Window > Brush), click the checkbox that says “Shape Dynamics.” When you click on the words “Shape Dynamics,” a set of tools is brought up to te right. Under “Size Jitter,” select “pen pressure” from the drop down menu.”
- Also click the check box and words “Transfer,” in the menu on the left, and under “Opacity Jitter” select “pen pressure.” For even more softness, under “Flow Jitter” also select “pen pressure.” Your brush should now look like this:
- You can also use this kind of brush for your eraser.
- Note that this brush only works with your wacom pen, not with your mouse, so if you make a mark with your mouse, it will be the big, round, solid brush.
|This brush mimics real brushes, but you need to layer up the colors, just like real paint.|
Remember to SAVE as you go along! Save as a “psd” file to preserve your layers for future editing. When you are finished and ready to share with the world, on the web, “Save For Web” (File > Save For Web), select “jpg” from the drop down menu, and reduce the size to something like 800 x 600 pixels. Even though you should paint at a high resolution (8.5 x 11 inches, 300 dpi), you should never put full resolution images on the web. It will make puppies cry.
Okay, that’s enough for now, but I will share some more techniques with you in the future. 🙂
Wendy PiersallJanuary 10, 2012 at 5:15 PM
Since I've worked with Photoshop since 1997, here are a few tips that may make this easier for you and your readers:
It would be much easier to 'erase' the extra fabric by simply selecting the outer area and deleting it. Alternatively, you could create a layer mask to hide the outside area without deleting it.
If selecting the outside area of your garment doesn't work, it could be because your sketch doesn't have a closed 'loop' around the perimeter. The easiest way to fix this is to either close the 'loop' with additional sketching, or to use the area select tool to deselect the interior of the garment area.
Lastly, instead of burning and dodging your fabric swatch to simulate depth, you could create an additional layer that creates shadows and highlights – just the same way you did with the blue painted color, but with gray. Then you can put that layer above your fabric swatch and change the transparency mode to "Overlay" (though depending on your color selections, a different mode might work better, such as 'Multiply' or perhaps 'Color').
Hope that helps! 🙂
CarlyJanuary 10, 2012 at 5:16 PM
This is so great, thank you! Now if only I had reasonable drawing skills… 🙂
LaurenJanuary 10, 2012 at 5:19 PM
Great tutorial! I remember once upon a time learning this in school but had forgotten all about it. This makes it SO much easier to learn, since you've laid it all out for us visually. Thank you!
American DuchessJanuary 10, 2012 at 7:30 PM
Wendy, as you know, there are so many different ways to do things in PS. I was trying to go with the simplest way that would make the most sense to a beginner. Dealing with layer styles, masks, and painting technique might seem too daunting to someone just starting out and who doesn't have much painting experience, especially using a wacom, so for starters erasing around your drawing is the easiest to understand, though may not be the quickest method.
Using the magic wand lasso to select the area around an image is fine for some images, but not for all. As you pointed out, it won't work for line drawings done on transparent layers, but making sure all lines on the sketch are closed can be tedious, and may overwork the sketch. For existing images, like pieces you're painting over, by all means, it works great, and I use it all the time, but that's for another tutorial 🙂
Hallie LarkinJanuary 10, 2012 at 7:36 PM
Fantastic post Lauren!
Ingrid MidaJanuary 10, 2012 at 10:29 PM
This is a gift! Thank you. I can draw but have wanted to go digital and this makes it look so easy. I must get myself a tablet!
BethJanuary 11, 2012 at 1:58 AM
I had no idea that tablets are so affordable! (Now I'm extra grumpy that The Job refuses to buy me one. 😉 Once upon a time I learned how to make fabric repeats, but your version is so much easier for garment sketches. I've got to brush up my Photoshop skills, pronto!
Lauren RJanuary 11, 2012 at 2:42 AM
Beth, the bamboo is a pretty nice little tablet too. They used to be called "graphire," and I had one for my first tablet. Loved it. Again, there are so many ways to do these things, no right or wrong way, so just go for it :-). I adore the ease Photoshop provides in being able to quickly mock up a design, change the colors, try different things out. 🙂
Juliana GaulJanuary 11, 2012 at 3:02 AM
Fabulous, Lauren! Thank you SO much! 😉
JulianaJanuary 11, 2012 at 3:19 AM
…time to find the Wacom tablet and drag it out of wherever its hiding…. 😉
Madame BergJanuary 11, 2012 at 2:25 PM
Ooooh, this reminds me so much of when I made custom content for the Sims 2 😀 I spent waaay too many hours on that stuff. I was very eager to get a wacom or something similar, but lost interest before I got to it.
But if you don't have a tablet, drawing a sketch on "real" paper and scanning it should work too, but with a little more fiddling, I suppose? You could change layer mode to Multiply? Must go test! Thank you!
Katherine @ WeSewRetro.comJanuary 17, 2012 at 2:32 AM
Huzzah for CS5! It's definitely worth the time to learn – content aware fill is pretty much wizardry.
UnknownNovember 22, 2013 at 12:35 PM
This comment has been removed by a blog administrator.
Naveen SMay 17, 2018 at 10:09 AM
Pretty blog, so many ideas in a single site, thanks for the informative article, keep updating more article.
Webdesining course in chennai