V247: Making a 1790s Gainsborough Hat

Yesterday I made a Gainsborough hat to go with the new purple 1790s “Robe Royaliste”.  I researched many a fine fashion plate from Dames a la Mode, and raided the craft store for basic supplies and any decorations that might work.  Here was my swag…

For the basic hat construction, I chose to cover a straw base.  I chose a velveteen-suede-ish material with a batting back, which saved me buying extra felt to sandwich between the straw and the fabric.  To heighten the crown, I got cross stitch plastic, which is flexible but also strong.  I got mine in black, but I recommend getting a color you can see a marking pen on.

I used the existing crown of the straw hat for a base and wrapped my plastic mesh around it, trimming and patching with extra plastic as needed, and forming a slanted sort of cone.  Unfurling the cone, I could trace the shape of it onto my fabric, and also mark out my circular crown top.  Both pieces were covered in fabric, using the Glue Of The Gods (hot glue), and fabric glue.

To match the crown to the crown top, I turned in the fabric tabs, then seated the top into crown, using hot glue to adhere the fabric tabs on the inside.  Then I whipstitched around the top, on the outside, which makes for a lovely, clean, strong edge.

Then it came time to cover the brim – no easy task!  As many of you know, if you have a hat that will have a curved brim of any kind, covering in fabric can be a right royal mess.  I thought I could best it with fabric glue painted on the straw, but the glue oozed through the fabric in places, leaving spots, and generally didn’t adhere the way I needed.

I ended up using Heat n Bond, a double-sided fusible.  Unfortunately, ironing the brim to death meant the straw ridges now show through.  Next time I will use a spray adhesive/cement!

The left-over glue spots also still show, but instead of being supremely bummed, I’ll just imagine it’s water spotting and “age,” such as one might acquire walking through the drippy streets of Paris in 1790.

The last construction step was to bind the edge of the brim.  Usually I go with a wide pre-packaged bias, but this time I used self-fabric cut into wide bias strips, and glued into place (ain’t no way a needle would pass through the brim at this point!).  Here’s the final construction…

And then on to trimmings!  I really wanted to use the green bird, but ended up not.  I like the stripey “Halloween” bow so much, though, I might go back for another, and also some black feathers.

So there’s my Gainsborough, in all its glue-spotted glory.  The thing weighs a ton, and I’m not sure how I’m going to keep it atop my wig, and my wig atop my head, but I’ll find a way. 🙂

The End.

10 Comments

Leave a Reply

Discover more from American Duchess Blog

Subscribe now to keep reading and get access to the full archive.

Continue reading